OFNA Racing Titan Twin - Manual (Page 19)

ASSEMBLY OF THE SHOCK ABSORBER
* Made eight shocks for front and rear use.
40076
Shock Body
40090
7mm
E-Ring
40090
Washer
(2mm)
40090
Washer
(1mm)
40090
3.5mm
O-Ring
40059
14.7mm
O-Ring
40054
Shock Shaft
2.6x5mm
Washer
32235
Shock Piston
40060
2.5mm
Nylon Nut
3. Pull down piston, attach pressure top
and shock oil overflow with tissue
paper.
1. Pull down piston and pour
oil into shock cylinder.
*Move Slowly.
32033
Pressure Top
40093
Shock Cap
*Fit into the groove.
down.
UP
ASSEMBLY THE DUST COVER AND SHOCK SPRING
40058
Shock Shaft
Dust Cover
2.To remove air bubbles by slowly
moving piston up and down.
FILL THE SHOCKS WITH OIL
* Push 6mm ball joint
into ball end.
40276
Shock Spring,
Long, Black
40063
Spring Holder
30411
6mm Ball
40059
14.7mm
O-Ring
* Fit the o-ring into
groove.
40056
Shock Plastic
Rod End
49041
Alum.
Adjust Nut,
Orange