V.I.O. POV.1 - Manual (Page 11)

Overview of Shoot, Tag, Edit, and Share 11
•
•
•
•
•
•
Overview of the User Manual
The POV.1 User manual is divided into two main sections:
• POV.1 Hardware Guide - This section shows you how to Shoot and
Tag. Learn about setting up the POV.1, the user interface, recording and
playing video, mounting the camera head and working with the remote
control
• POV Manager User Guide - This section shows you how to Edit and
Share. Learn about installing the POV Manager software, understanding
the interface, managing your videos, playing videos, editing videos, and
sharing your videos online.
Overview of Shoot, Tag, Edit, and Share
The POV.1 is intuitive and easy to use. Although this manual provides
detailed information about using the hardware and software, here are the
basic steps you’ll take to Shoot, Tag, Edit and Share video with the POV.1:
• Set-up the POV.1 Recorder
• Connect the camera head to the POV.1 Recorder using the digital A/V
cable
• Install the 4 AA batteries into the compartment on the back of the
POV.1
• Install the SD Card into the compartment on the bottom of the POV.1
• Mount the camera head
• Use one of the mounting accessories included with the POV.1
• Or be creative -- you can just hold onto the camera head, wedge it
somewhere, strap it down with zip ties, or even hold it in place with
duct tape.
• Shoot video from your point of view
• Hit the POWER button
• Press the RECORD button on the POV.1 or the REC/TAG button on
the remote control to shoot some video in Clip mode
• Tag scenes you like using the TAG soft key on the POV.1 or the
REC/TAG button on the remote control