V.I.O. POV.1 - Manual (Page 14)

14 POV.1 Recorder
•
•
•
•
•
•
Connecting the Camera Head to the POV.1 Recorder
To start setting up the POV.1, connect the camera head to the POV.1 using
the digital A/V cable. You need to make sure to connect the camera head to
the camera end of the cable. Note that the camera end of the cable is marked
with the V.I.O. logo.
The camera end of the cable is marked with the V.I.O. logo
The digital A/V cable connector has a small notch in it so that it will only
plug in when aligned properly. Do not force the connector since doing that
may damage the connector pins. Once you plug the cable into the camera
head you then need to turn the metal ring to screw the cable in place and
secure the connection.
Now connect the other end of the cable to the connector on the top of the
POV.1. As with the camera head connection, be sure to align the notches,
plug in the connector, and then screw the connector in place.