V.I.O. POV.1 - Manual (Page 13)

Setting up the POV.1 13
•
•
•
•
•
•
• • • • • •
POV.1 Recorder
The POV.1 Recorder section explains the details of using the POV.1
Recorder to Shoot and Tag your video. To find out how to Edit and Share
your video, refer to the POV Manager User Guide that appears later in this
manual.
Setting up the POV.1
Setting up the POV.1 is very straightforward. Just connect the camera head
to the POV.1 Recorder, install the batteries and SD Card, and you’re ready
to start creating video from your Point Of View.
Protecting the POV.1 Recorder Display
In order to protect the POV.1 Recorder’s LCD screen from scratches the
POV.1 comes with an LCD protective cover, which is a small plastic sheet
that is used to cover the screen.
To install the LCD protective cover:
1. The POV.1 is shipped with a plastic sheet covering the display. If this is
still on the unit remove it.
2. Make sure the LCD screen is clean and free of any dust, smudges,
fingerprints, etc.
3. Peel the paper off the back of the sheet and position the plastic sheet over
the LCD and press it down to secure it.
4. Use your finger to smooth out any air bubbles that may be trapped.
Replacement screen covers are available on our website at
www.vio-
pov.com .