V.I.O. POV.1 - Manual (Page 48)

48 POV.1 Recorder
•
•
•
•
•
•
Connecting to a Mac
You can connect the POV.1 to a Macintosh (version 10.3.9 or higher) using
the USB cable included with the unit.
Before connecting the POV.1 to the Mac, V.I.O. recommends that you install
Quicktime components enabling MPEG4 playback that you can download
from Perian at
http://www.perian.org .
When the USB cable is connected, the POV.1 automatically changes to USB
mode. The SD card installed in the POV.1 Recorder will appear as a storage
device (disk drive) on the Macintosh.
You can also remove the SD card from the POV.1 Recorder and place the
card directly into an SD card reader attached to the Mac.
You can access and download clips by opening the POV.1 folder, then the
DCIM folder, and finally the 100_POV1 folder.
Video segments can then be edited with any Macintosh video editing
software such as iMovie or Final Cut Pro.
NOTE: Editing software on the Mac does not recognize the TAG marks that
you may have placed on your video during Clip recording.