Vernier EasyData Guidebook - Manual (Page 18)

EasyData Guidebook 17
Collecting Data Manually (Selected Events)
In Selected Events mode, each reading collected from a sensor becomes a y
value. EasyData automatically assigns the sample number as the x value.
To collect data in Selected Events mode
This example uses a pH sensor connected to an EasyLink and a TI-84 Plus
calculator. Your screens will vary depending on which sensor and data-collection
device is attached.
1. Turn the calculator on, and start the EasyData app.
After a few seconds, the EasyData main screen is
displayed. The screen shows the current EasyData
mode and the current sensor reading.
2. From the EasyData main screen, select , and
then choose Selected Events.
3. Select to begin collecting data. EasyData waits
for you to collect the first sample.
4. When you are ready to collect the first sample (y value)
and the displayed reading appears stable, select
.