Vernier EasyData Guidebook - Manual (Page 43)

42 EasyData Guidebook
Managing Data: Saving, Opening and Deleting
Experiments
Using EasyData it is possible to save your experimental setup along with any
collected data, for later use. When an experiment is saved it includes the current
sensor calibrations, data-collection parameters, and any data that had been
collected.
Saved experiments are easy to open and help to save time when repeating
experiments. Calculator memory does have limitations and it is advisable to
routinely delete unnecessary experiment files. The EasyData application has been
designed to allow a maximum of 50 saved experiment files.
Saving an Experiment
1. Select , and then select Save As….
2. Using the calculator keypad, enter a name for the
saved experiment. The experiment name can include
both letters and numbers, but must be no longer than 8
characters and cannot begin with a numeral.
3. Select to save the experiment