Vernier DataMate Guidebook - Manual (Page 45)

DataMate Guidebook 43
Student Force Sensor SFS-BTD
Student Radiation Monitor SRM-BTD
Turbidity Sensor TRB-BTA
Thermocouple TCA-BTA
UVA Sensor UVA-BTA
UVB Sensor UVB-BTA
Vernier Photogate (Assembled) VPG-BTD
Voltage Probe VP-BTA
DO I NEED TO PURCHASE AN ADAPTER?
You do not need an adapter if you are purchasing new sensors for a LabPro or CBL 2.
Simply buy the sensors with order codes that end in “-BTA” or “-BTD” and you'll be
ready to collect data. If you purchased older sensors, you may need an adapter. This chart
should help. If you need additional help, call Vernier (888) 837-6437.
Sensor Sensor Order Code LabPro/CBL 2 Adapter Original CBL Adapter
Analog (5-pin) (__-DIN) DIN-BTA DIN-BTA
Motion Detector
(new, removable
cable) MD-ULI MDC-BTD (Cable) MDC-BTD (Cable),
Motion Detector
(old, non-removable
cable) MD-ULI CBL-RJ11 CBL-RJ11
Vernier Photogate VPG-DG PG-BTD (Cable) CBL-P or CBL-2P
PASCO Photogate
(has LED) VPG-DG DG-BTD CBL-P or CBL-2P
PASCO older
Photogate (no LED) VPG-DG Does Not Work Does Not Work
Home-Made
Photogate PG-ULI HMP-BTD CBL-P or CBL-2P
Smart Pulley ME97387 DG-BTD CBL-P or CBL-2P
Radiation Monitor RM-DG DG-BTD CBL-P
Student Radiation
Monitor SRM-DG RAD-BTD (Cable) CBL-P
Rotary Motion
Sensor RMS-ULI ROT-BTD Does Not Work