Vernier DataMate Guidebook - Manual (Page 7)

DataMate Guidebook 5
TI-83 Plus, 83 Plus Silver Edition, 84 Plus, 84 Plus Silver Edition: Press 2nd MEM .
Select Reset, and then press twice. Select All Memory. Select Reset.
TI-86: Press
2nd MEM . Select RESET . Select ALL . Select YES .
TI-89, 89 Titanium, 92, 92 Plus, and Voyage 200: Press 2nd MEM . Press
F1 .
Select
All Memory (All on the TI-92), and press
ENTER . You may need to adjust screen contrast
by holding down and then pressing the — key until the screen is legible.
CALCULATOR PROGRAM INSTALLATION
When it is time to collect data, you will run a program called DataMate on the calculator.
New calculators do not contain the program. You must install it, but the process is very
simple. The LabPro automatically determines which kind of calculator is connected and
transmits the appropriate version of DataMate.
1. Prepare the calculator to receive the program.
TI-73, TI-73 Explorer, TI-82, TI-83, TI-83 Plus, TI-83 Plus Silver Edition, TI-84
Plus, TI-84 Plus Silver Edition
Turn on your calculator and press
2nd
[ LINK ] (on the TI-73 and TI-73 Explorer,
press
APPS
, then select Link…). Press to RECEIVE , then press
ENTER
(Waiting… appears on your screen).
TI-86
Turn on your calculator and press
2nd
[ LINK ], then press
F2 (Waiting… appears
on your screen).
TI-89, TI-89 Titanium, TI-92, TI-92 Plus, and Voyage 200
Turn on your calculator. Set it to the home screen by selecting the home key.
2.
Press the TRANSFER button on the LabPro. “Receiving…” followed by a list of the
loaded programs (or application) is displayed on the calculator.
3. Two beeps from LabPro will indicate the transfer is complete. Press
2nd
[ QUIT ].
TI-82, and TI-83
Press
PRGM to see DataMate and its necessary subprograms.
TI-73, TI-73 Explorer, TI-83 Plus, TI-83 Plus Silver Edition,
TI-84 Plus, TI-84 Plus Silver Edition
Press
APPS to see DataMate.
TI-86
Press
PRGM and then press [ NAMES ] to see DataMate and its
necessary subprograms.
TI-89, TI-89 Titanium, TI-92, TI-92 Plus, and Voyage 200
Press 2nd VAR-LINK to see DataMate and its necessary
subprograms.