BendixKing KLN 900 - Abbreviated Guide - Manual (Page 46)

• Rotate the left outer knob as necessary to position the cursor over the
waypoint to be deleted.
• Press F. The letters DEL (delete) will appear to the left of the identi-
fier and a question mark will appear to the right of the identifier. If a mis-
take was made and you do not wish to delete this waypoint, press
F.
• Press E and the waypoint will be deleted from the flight plan. The
other waypoints in the flight plan will be correctly repositioned.
12.5 Deleting Flight Plans
To delete a flight plan which is no longer required:
• Display the flight plan (FPL 0, FPL 1, FPL 2,..., or FPL 25) which is to be
cleared.
• Make sure the left cursor function is turned off. If the left cursor is on,
press the left C to turn it off.
• Press F. The words DELETE FPL? will appear at the top of the page.
If a mistake was made and you do not wish to clear this flight plan, press
F.
• Press E to clear the flight plan.
12.6 Storing FPL 0 As A Numbered Flight Plan
The active flight plan (FPL 0) may be copied to a numbered flight plan
(FPL 1, FPL 2, ... , or FPL 25) so that it can be recalled for later use. This
may be desirable, for example, if the active flight plan was originally cre-
ated on the FPL 0 page and not as a numbered flight plan. To store the
active flight plan (FPL 0) as a numbered flight plan (FPL 1, FPL 2, ... , or
FPL 25):
• Select a numbered flight plan page which does not contain any way-
points. If none exist, use the procedure described in section 12.5,
“Deleting Flight Plans”, to clear a flight plan which is no longer required.
• Press the left C to turn on the left cursor function with the cursor over
the blank first waypoint position.
• Rotate the left outer knob one step counterclockwise to position the
cursor over LOAD FPL 0?
• Press E to load the active flight plan into this numbered flight plan.
42