BendixKing KLN 900 - Abbreviated Guide - Manual (Page 51)

13.7 The Distance/Time 2 Page (D/T 2)
When the FPL 0 page is displayed on the left side and the D/T 2 page is
displayed on the right side, the distance and estimated time of arrival are
displayed for each of the active flight plan waypoints. The distances are
as described for the D/T 1 page. The time zone associated with the esti-
mated time of arrival is annunciated at the top right of the D/T 2 page.
The time zone may be changed by enabling the right cursor function to
bring the cursor over the time zone and then turning the right inner knob to
select the desired time zone. Changing the time zone on the D/T 2 page
changes the time zone on other pages where time is displayed.
If a numbered flight plan page other than FPL 0 is displayed on the left
side, no estimated times of arrival are displayed.
If a non-flight plan page is displayed on the left side, the format of the D/T
2 changes to display just the distance and estimated time of arrival for the
active waypoint and for the last waypoint in the flight plan.
13.8 The Distance/Time 3 Page (D/T 3)
When any flight plan page is displayed on the left side and the D/T 3 page
is displayed on the right side, the distance and desired track (DTK) are
displayed. The distances are as described for the D/T 1 page. The
desired track is the great circle course between two waypoints. You
should view the diagram in Appendix A of the KLN 900 Pilot’s Guide if you
are unfamiliar with this term.
If a non-flight plan page is displayed on the left side, the format of the D/T
3 page changes to display just the distance and desired track for the
active waypoint and for the next waypoint in the flight plan. Note that
this is different than for the D/T 1 and D/T 2 pages.
13.9 The Distance/Time 4 Page (D/T 4)
The format of the D/T 4 page does not change. It displays on a single
page the pertinent times for the flight regardless of what is displayed on
the left page and regardless of whether flight plan or Direct To operation is
occurring. The information displayed on the D/T 4 page is the following:
• The destination waypoint
• The selected time zone. The time zone may be changed by pressing the
right C and using the right inner knob to select the desired time zone.
• DEP -The departure time. There are two definitions of departure time
depending on what has been selected on the Setup 4 page (SET 4). If
the SET 4 page displays RUN WHEN GS > 30 KT, then the departure
time is that time when the groundspeed first reached 30 knots. If the
47