BendixKing KLX 135 - Pilots Guide - Manual (Page 57)

We will now use another example to show how we may enter a few
characters and then scan through all the waypoints in the data base
beginning with those characters. Let’s use this method to find
La Guardia Airport in New York City.
To select an airport by scanning the airport name:
1. With the cursor off and the right inner knob in the “in” position,
select the APT (Airport) 1 page. The airport displayed at this
time is not important.
2. Turn on the cursor ( B ).
3. Move the cursor over the first
character in the airport name
(figure 4-81).
4. Change the first character to an
“L”.
5. Move the cursor one place to the
right, and select an “A”
(figure 4-82).
6. Now, move the cursor one place
to the right and pull the right inner
knob out. The rest of the airport
name field will appear in inverse
video (figure 4-83).
7. Turn the right inner knob clock-
wise, scanning through
La Crosse Municipal, La
Grande/Union airport, and
several others. Eventually, you
will arrive at “LA GUARDIA”
(figure 4-84). By pushing the
right inner knob in and turning it,
you can leaf through the
remainder of the pages for La Guardia.
NOTE: This same method may be used with the name of the city
where the airport is located.
Basic GPS Operation
4-26 Effective Date 3/94 006-08751-0000 Rev 0
Basic GPS Operation
Chapter 4
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
118.00 MGGT 4950ft
136.97 LA
AURORA INTL
>Leg GUATEMALA CITY
CRSR GTM
Figure 4-83
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
118.00 KLGA 20ft
136.97 LA
GUARDIA
>Leg NEW YORK
CRSR NY
Figure 4-84
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
118.00 KPAE 610ft
136.97
S NOHOMISH CO
>Leg EVERETT
CRSR WA
Figure 4-81
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
118.00 MGGT 4950ft
136.97 L
A AURORA INTL
>Leg GUATEMALA CITY
CRSR GTM
Figure 4-82