BendixKing KMA 30 - Manual (Page 2)

Page 2 KMA 30 Pilot Guide 202-890-5464
This pilots guide provides operating instructions for the KMA 30 Audio
Panel. Please read it carefully before using the equipment so that you can
take full advantage of its capabilities.
This guide is divided into operating sections such as Transceiver Selection,
Audio Selector, Intercom, and Marker Beacon Receiver, and special func-
tions. The center section provides a handy reference that you can remove.
KMA 30 controls
Power Switch (1) (EMG-Fail Safe Operation)
The power switch controls all audio selector panel functions, intercom and
marker beacon receiver.
When the unit is turned off, either by pressing the volume control, or if the
breaker is pulled removing power, the KMA 30 is in Fail-Safe mode. In this
mode, the pilot’s headset is connected to COM 1 for transmit and receive,
and connected to unswitched input #1 for priority audio alerts. The fail safe
audio will only be heard in the left ear of a stereo headset.
Communications Transmit
(XMT) Selection (2)
To select COM 1 or COM 2 for transmit,
press the button on the bottom row, next to
the XMT legend. The bottom and top but-
ton indicators light, showing that you will
transmit and receive on the selected radio.
The audio on the radio selected for trans-
mit cannot be deselected.
Communications Receive (RCV) Selection (3)
To listen to the other radio, press the upper button, in the RCV (receive) sec-
Transmitter selection
Receiver selection