BendixKing KMA 30 - Manual (Page 9)

August 2012 KMA 30 Pilot Guide Page 9
6. My Smartphone didn’t reconnect, what do I do?
a. It is most likely that the KMA 30 dropped the pairing either be-
cause of added pair that exceeded the limit, or because of some
corruption in the stored information. Simply un-pair by delet-
ing the KMA 30 in your Bluetooth phone, and re-pairing with
the audio panel. This is often true if you leave the Bluetooth
range, and return while the audio panel is still on.
Apple iPhone users may have to set their “Settings”
“Accessibility” selection for “Incoming Calls” and select
“Headset” instead of “Default.”
7. Can I play my laptop movie audio?
a. If your laptop is compatible as Bluetooth A/V source (not all
are), yes. Just add the KMA 30 as a Bluetooth device as you
would a stereo speaker device. There are also Bluetooth de-
vices available (such as the Sony TMR-BT10A Bluetooth
Transmitter Adapter) to plug into the audio output jack that
will enable you to stream music to the audio panel. Note: lap-
top computers with spinning hard drives may fail to work
ab0ut 7,500’, due to a loss of air pressure on the disc
mechanism.
8. Can the Bluetooth be played through Music 2?
a. No. However, you can engage Music Function, “Music 1, all
headsets.”
9. My music quality is very poor, and can only be heard in TEL
mode, what’s wrong?
a. Check your Smartphone, and be sure that it is paired with the
KMA 30 as a “speaker” or “wireless speaker” in A2DP mode.
Split Mode
The Split mode puts the pilot on COM 1, while the copilot can use
COM 2 independently. To enter the split mode, press both the COM 1
and COM 2 XMT buttons at the same time. To exit, press the desired
COM 1 or COM 2 XMT button.