BendixKing KMA 30 - Manual (Page 7)

August 2012 KMA 30 Pilot Guide Page 7
Quick reference KMA 30 Operation
This pull-out section covers advanced operation of the KMA 30.
Bluetooth Connection
1. Turn on the KMA 30.
2. From your Bluetooth enabled device, search for other devices,
and select the KMA 30.
3. If an access code is required, enter “0000” to connect to the KMA
30, unless this is changed (see FAQ #2)
You can now make and receive calls with the audio directed through
the audio panel, and stream music to Music input 1.
The Bluetooth module can be turned off, of desired, by pushing the
AUX and ADF buttons while the unit is being turned on. The module
will reset when unit power is next cycled.
Bluetooth® FAQ
1. Some Bluetooth terms to know:
Hands Free — audio panel acts as a hands free telephone hand-
set
A/V Controller — the audio panel has some control over the
music streaming device (see FAQ #7).
Stereo headset — the audio panel will receive music audio
streaming from the KMA 30.
Pairing — is when two Bluetooth devices establish communica-
tion and “agree” to connect. This occurs the first time the devices
“meet” and they will store the information to reconnect easily in
the future.
Discoverable — the KMA 30 is always “discoverable.” That
means it will allow any Bluetooth device within range to detect
its presence and attempt to pair. Pairing will only occur when
both devices agree, so you will have to accept the pairing on your
device.
Connection — this occurs when Bluetooth devices that have
been previously paired see each other again and reestablish their
communication. This can happen automatically, or by prompting
the user to accept the connection again. The KMA 30 will always
look for paired devices when it is turned on, and connect with the
first one that allows connection.