1 local loopback test – CANOGA PERKINS 2270 Fiber Optic Modem User Manual
Page 55
Advertising
55
2270 Fiber Optic Modem
5.2.1 Local Loopback Test
When activated, the local loopback test will cause all data transmission from the near-end (local)
user device to be looped back toward the receive of that same device. No data is looped back to
the far-end (remote) user device unless a bidirectional Local Loopback method is selected (refer to
Table 5-A, "Loopback Options" ).
The loopback point is set at the electrical interface of the local modem (see Figures 5-2 and 5-3).
Refer to Chapter 3, "Data Interfaces," for pin numbers.
Figure 5-2.
"Bi-Directional"
Local Loopback
Active
Figure 5-3.
"Interface Only"
Local Loopback
Active
Figure 5-4.
"Optical Only"
Remote Loopback
Active
Advertising