CANOGA PERKINS 2270 Fiber Optic Modem - Manual (Page 61)

61
2270 Fiber Optic Modem
7.3 System Electrical
Interfaces Supported RS-232C/RS-423, RS-422, V.35,
DS1/T1, TTL/BNC, Programmable
Buffered RS-530, Mil Std-188-114C,
RS-530, Transparent T1/E1
Duty Cycle for Clock Input 50% ± 20% 6.5 Mbps to 20 Mbps
50% ± 25% less than 6.5 Mbps
Interface Type Interface Connector
RS-232C/423, Programmable RS-530, RS-530 female DB-25
RS-422/Mil Std-188-114C female DC-37
CCITT V.35 female 34-pin Winchester
DS1/T1, B2 four-position barrier strip
TTL/BNC four male BNC coaxial connectors
RS-422/Mil Std 188-114C four or five male twinaxial
connectors (BJ-77)
B1 female DA-15
B3 two male BNC connectors
Power Requirement
Standalone
Standard 115 VAC ± 10% @ 0.22 Amps (max.)
Optional 230 VAC @ 0.11 Amps optional
(max.)
47 to 63 Hz (both)
Optional 48 VDC (nom) @ .5 Amps
7.4 Physical Dimensions
Standalone 8.50 W x 12.8 D x 2.5 H inches
2201 Rack Chassis 19.0 W x 8.75 D x 12.0 H inches
2202 Modem Shelf 19.0 W x 12.75 D x 3.5 H inches
Rack-Mount PC Card 7.8 W x 12.50 D x 1.0 H inches
Unit Weights (shipping)
2270 Standalone 3.63 pounds
2201 Power Supply Monitor Card 0.50 pounds
2201 AC Power Supply 9.0 pounds each
2201 DC Power Supply 3.0 pounds each
2201 Rack Chassis 7.70 pounds
2202 Modem Shelf 3.0 pounds
2200-I Interface PC Card 0.16 pounds