CANOGA PERKINS 2361 T1 Modem - Manual (Page 39)

The EdgeAccess Universal Chassis System
2361 Modem Users Manual 4-11
Table 5: System Alarm Option Definitions
Alarm Name Condition Notification LED
Modem
Redundancy Status
Reports the status of
the Remote and
Local, Primary and
Secondary Modems.
Active, Inactive and N/A None
Configuration
Errors
Fiber connection
error, remote partner
error, (see CFG LED
error list in section
3.1.1)
OS, OLIM type, OLIM slot, ELIM
type, ELIM slot, Fiber line Setup
(see the note at the bottom of this
table)
CFG
Fiber Loss of Signal
Composite (fiber)
loss of sync
No, Yes LOS
Electrical Loss of
Signal
Loss of signal to the
ELIM
No, Yes LOS
Alarm Indication
Signal
Receiving AIS OK
AIS
on
ELIM
Link Self Test
Status
The auxiliary BERT
(which is always
running) is out of
sync.
OK, Bad, and NA (NA indicates
composite loss of sync)
TST
SQL Primary
Indicates inadequate
signal quality through
fiber. A possible
indicator of poor
quality fiber.
OK, Bad
SQL
on
OLIM
Optical Transmit
Level
Certain OLIMs allow
monitoring of
transmission power
(light level). Indicates
condition of optic
signal.
OK, Bad, or NA, if OLIM that
supports this feature is not present.
SQL Secondary
Indicates condition of
optic signal in
secondary
(redundant) OLIM.
OK, Bad, NA
Chassis
Management
Indicates presence of
an operative DMM
anywhere in the
domain (even in a
different chassis).
OK: A functioning DMM is present
OFF: No DMM is present
BAD: The Proprietary Chassis Link,
or the DMM itself is not
functioning properly