CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 22)

CanogaView ® Smart Element Manager
16 Enterprise Version
•
Remote Access – This option sets up the Client computer with shortcuts and menu
options to access a CanogaView Server.
•
Remote Access fro… - This option does not install CanogaView software on the target
computer, but does customize NNM for Canoga Perkins devices and for access to
CanogaView software installed on other computers.
Figure 2-8. Choose Install Set
2.2.10 Enter SNMP Trap Port
The "Enter SNMP Trap Port" screen allows the selection of a port number on which the
CanogaView Trap Service should listen for SNMP traps. The default port for this installation
is 163 and as explained on the installation screen, unless other network management
software uses this port, the default port should be selected.