CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 29)

CanogaView ® Smart Element Manager
Enterprise Version 23
Windows Specific Instructions
When integrating with HP’s Windows version of NNM, CanogaView Smart Element
Manager configures NNM to set the Management URL attribute for the Canoga
Perkins’ SNMP managed devices; DMM for 2U and 5U chassis based products,
9135 related devices and any of the managed devices residing in a standalone
device (eg. 1020, 1040, etc.). If for any reason this setting is unsuccessful, the
manual setting of such is required. The setting of the management URL must be
specified to be able to access an SNMP Agent’s View from the NNM web interface.
If a SNMP Agent's Management URL attribute does not get set properly, try
adjusting the NNM configuration change polling interval. This interval is accessed
via the NNM dialog: Options->Network Polling Configuration:IP/IPX
Make sure "Perform configuration checks" is checked. The value for "Configuration
polling interval" is the maximum length of time it should take for NNM to set the
Management URL for SNMP Agent(s) after installing CanogaView Smart Element
Manager. Since the default interval is one day, you may want to adjust this to a
shorter interval, at least temporarily. Note that these two parameters are also used
by the NNM netmon process.
If the Management URL still does not get set properly, it may be configured manually
as documented below.
Setting Management URLs Manually
1. Select a DMM, 9135/40 or 9135G symbol on a NNM submap.
2. Select "Object Properties" on the Edit menu.
3. Double-click on "General Attributes".
4. Set attribute "isHTTPManaged" to "True".
5. Set attribute "ManagementURL" to one of the following depending on the SNMP Agent
type:
DMM "http://nms_server_host:8080/nms/jsp/DomainView.jsp?IP_CONTEXT=agent_ip_addr"
9135 "http://nms_server_host:8080/nms/jsp/Dev91xxView.jsp?IP_CONTEXT=agent_ip_addr"
9135G "http://nms_server_host:8080/nms/jsp/Dev91xxgView.jsp?IP_CONTEXT=agent_ip_addr"
9140 "http://nms_server_host:8080/nms/jsp/Dev91xxView.jsp?IP_CONTEXT=agent_ip_addr"
Notes:
1. These are case sensitive.
2. Replace "nms_server_host" with the hostname or IP address of the server on which you
installed the CanogaView Smart Element Manager software.
3. Replace "agent_ip_addr" with the SNMP Agent's IP address.