CANOGA PERKINS L312 Ethernet Media Converter User Manual
Page 20
Advertising
EdgeAccess Universal Chassis System
L312 Ethernet Media Converters
4-2
Figure 6. New Connection in HyperTerminal
Step 4. At the Connect To dialog, pull down the Connect using menu, select the COM port, and click
OK. See Figure 7.
Figure 7. COM Port Selection Dialog
Step 5. At the COM Properties dialog, on the Port Settings tab, check for these selections (see
Figure 8):
•
Bits per second: 19200 bps
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
Advertising