11 enter snmp trap port, Figure 2-12: enter snmp port trap – CANOGA PERKINS CanogaView Smart Element Manager User Manual
Page 21
Advertising
CanogaView
®
Smart Element Manager
Standalone Version
15
2.2.11 Enter SNMP Trap Port
The "Enter SNMP Trap Port" screen allows the selection of a port number on which the
CanogaView Trap Service should listen for SNMP traps. The default port for this installation
is 163 and as explained on the installation screen, unless other network management
software uses this port, the default port should be selected.
Figure 2-12: Enter SNMP Port Trap
Advertising