CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 40)

CanogaView ® Smart Element Manager
34 Standalone Version
Chassis View
Chassis View details all modules and LED status within a chassis. Major and minor alarm
conditions are reflected on the CIM and the individual modules LED status. Reference the
applicable Users Manuals for details on the LED status.
Figure 3-15. Chassis View.
To configure particular cards within the Chassis View screen, e.g. 2361, 2461, DMM CIM,
etc., move the mouse cursor over the card and single left click.
Device (Modem) View
To manage particular devices, i.e. configure, monitor status and alarms, perform
diagnostics, etc., use the menu and/or toolbar icons to launch the associated applications as
defined in Section 3.2.3 "Toolbar Icons."
For example, by moving the mouse cursor over the 2361 modem in the chassis shown
previously, the subsequent 2361 redundant circuit view follows. This display shows 4
modems, LEDs, link status and which modem pair is active and which is in standby mode.