CANOGA PERKINS CanogaView Smart Element Manager - Manual (Page 7)

CanogaView ® Smart Element Manager
Standalone Version 1
Chapter 1 System Requirem ents
The CanogaView Smart Element Manager Server’s hardware and software minimum
requirements as well as the SNMP Agent requirements are listed in this section of the
manual. The Standalone Version of CanogaView Smart Element Manager is installed with a
restricted license with the following installation and access limitations:
• Windows installation support only. UNIX support is available via the CanogaView
Smart Element Manager Enterprise Version.
• Single login session support as only one active login session is allowed at a time.
The Enterprise Version has upgrade options for 10 seat and unlimited seat licensing.
• Server platform access only as the client CanogaView Smart Element Manager
applications must be executed from the same platform that the server software was
installed. Remote web browser user interface support is provided in the Enterprise
Version.
• HP OpenView installation integration support is not supported. Installation options
which integrate CanogaView Smart Element Manager with HP OpenView 6.1, are
provided in the Enterprise Version.
1.1 Hardware Requirements
•
Intel Pentium 500MHz Processor (1GHz or higher is strongly recommended)
•
128MB RAM (256MB or higher is strongly recommended)
•
100MB free disk space
•
SVGA Monitor with 256 colors and 1024x768 resolution will display but the quality
will be extremely poor. It is strongly recommended that 65536 colors (16 bit) or
higher be used.
•
Network Adapter Card is required for Ethernet LAN support
1.2 Software Requirements
•
Microsoft Windows OS with TCP/IP Services:
•
Windows NT 4.0 SP4 -or-
•
Windows 2000 -or-
•
Windows XP
•
Web Browser supporting Java Plug-In:
•
Netscape Navigator 4.06 or later –or-
•
Microsoft Internet Explorer 4.0 or later
•
Java Plug-In 1.3.0_01 or later
1.3 SNMP Agent Requirements
The IP address of the server on which the CanogaView Smart Element Manager
Standalone software is installed must be added to the SNMP Agent’s host table for each