CANOGA PERKINS 9155 Network Interface Device - Manual (Page 9)

Chapter 1
Overview
The 9155 is a 12-Port Aggregator Network Interface Device that provides intelligent optical
demarcation and terminates managed transport at the point of delivery as it supports 802.3ad link
aggregation. The 12 modular ports support 10/100/1000 Mbps Ethernet in fiber or copper.
In addition, the 9155 offers Layer 2 statistics, local and remote loopback, remote software upgrade,
remote control and monitoring, and management through CanogaView.
The 9155 supports up to four single-port (SP), hot-swappable, plug-in interface modules that receive
and transmit 10/100/1000BASE Ethernet data on single mode or multimode fiber optic cable. The
9155 also supports a multiple-port (MP) module with eight ports that receive and transmit
10/100/1000BASE Ethernet data on single mode or multimode fiber optic cable. The interface
modules can include auto-ranging UTP input with configurable optical output or support these
specific UTP and optics options:
• Auto-ranging UTP
• 10Base FL at 850 nm, mulitmode
• 10Base LD, SD, or XD at 1310 nm, single mode
• 10Base EX at 1550 nm, single mode
• 100Base MX at 1310 nm, multimode
• 100Base SD or XD at 1310 nm, single mode
• 100Base EX at 1550 nm, single mode
• 1000Base SX at 850 nm, multimode
• 1000Base LX, LD, or XD at 1310 nm, single mode
• 1000Base ZX or EX at 1550 nm, single mode
The 9155 front panel, shown in Figure 1, includes:
• Console port for management through VT100 emulation
• Up to four single port interface modules
• One eight-port interface module
• LEDs for system management and various module functions; for details, see Chapter 3.
• Reset switch to reinitialize the 9155 while maintaining data service
Figure 1. The 9155 Front Panel
9155 Network Interface Device 1-1