7 user accounts screen, 7 user, Accounts screen -10 – CANOGA PERKINS 9155 Network Interface Device User Manual
Page 26
Table 5. Security Configuration Option Definitions
Menu Item
Description
1. Minimum Length
2. Minimum Alpha Characters
3. Minimum Numeric Characters
4. Minimum Punctuation Characters
5. Maximum Consecutive Character
Types
6. Maximum Same Character
Define characteristics of passwords; the range for all
fields is from 0 through 15
7. Allow username in password
Enable or disable the username appearing as or within
the password
8. Password Expiration Time
Set how often in days, 1 through 365, that the passwords
must be reset; 0 = disabled
9. Password Reuse Count
Set whether the password must be changed or can be
used again immediately; values are 0 (new password can
be the same) or 1 (new password must be different)
10. Lockout After Failed Attempts
Set how many times, from 1 to 10, that a user can try to
log in before a lockout; 0 = disabled
11. Lockout Type
12. Lockout Time (minute)
Set the type of lockout: Hard requires another user with
admin access to unlock the account on the User
Accounts screen; Timed requires that the user wait for
Lockout time before trying again, Lockout time is from
0 (none) to 30 minutes
13. Display Lockout Message
14. Lockout Message
Enable or disable and set the message, up to 30
characters, that appears at lockout
15. Lockout Console Port
Enable or disable access to the serial port
16. Inactivity Logout Time (minute)
Set the time, between 1 and 30 minutes, before
automatic log-out with no activity; 0 = disabled
4.5.7 User Accounts Screen
The User Accounts screen lists information about and options to set up system users by user name.
To access the User Accounts screen, see Figure 15 and follow these steps:
1. From the System menu type
7
, "Account Configuration," and press <Enter>.
2. At the User Accounts screen, type
1
to edit a user at the Edit User Account screen, or
2
to add a
user at the Add User Account screen, or type
3
to remove a host, then follow the prompts.
3. To return to the System menu, press <Esc>.
9155 Network Interface Device
4-10