5 display results – CANOGA PERKINS 9171 Configuration Guide User Manual
Page 259
Advertising
CanogaOS Configuration Guide
40-3
Step 4: you can use command show rsa keys in SSH server.
DUT1#show aaa method-lists authentication
authen queue=AAA_ML_AUTHEN_LOGIN
name= radius-login state =ALIVE : radius local line enable
DUT1#
40.5 Display Results
Telnet output
[uml: ~]$ telnet 3.3.3.3
User Access Verification
Username: user_test
Password:
Authenticating....
CanogaOS, 9170-6, Version 2.2(17), fcs1, 01/23/2008 16:40:43
DUT1>
Notice
Don’t forget to turn RADIUS authentication feature on.
Make sure the cables is linked correctly
You can use command to checking log messages if Centec Switch can’t do RADIUS
authentication.
DUT1# show logging buffer
Advertising
This manual is related to the following products: