Daiwa SEABORG-1000MT - Manual (Page 16)

14
Line data input
(With backing line 2)
This method is applied to data re-input which is to be made after the main line is wound up. This
method requires a main line of 100m or longer specific length.
2
3
5
4.
Paying attention to the lineʼs color coding, pull 50m of line off of
the spool.
1.
Connect the battery to the reel.
2.
Press the MODE SET BUTTON for 5 seconds, changing the
mode to P1 .
3.
Press the MODE SET BUTTON 2 more times and set the
mode to backing line 2.
This mode shows P3 blinking on the low left of the display.
5.
Press the RESET BUTTON for 2 seconds.
This will show the digits 100 in the lower area of the counter.