Line data input, With backing line 2), Attention – Daiwa SEABORG-1000MT User Manual
Page 17
Advertising
15
Line data input
(With backing line 2)
7.
Press the
RESET BUTTON
for 2 seconds to show
100.0
on
the upper counter.
8.
Wind up the 100m of line you pulled from the reel. This
completes the procedure.
7
Should “
Err
” appear on the display, then use the
MODE SET
BUTTON
to re-enter the data.
Attention
1.
Do not wind the end of the line onto the spool because it causes incorrect length
calculation. Move the power lever to OFF, and wind manually when nearing the end of
the line.
Advertising