Daiwa SEABORG-1000MT - Manual (Page 24)

22
Line feeding function
The line feeding function lets our line with the motor assisting the spool.
- The line feeding mechanism begins to work at a depth of 2.5 m
below the pre-set auto stop depth.
- When Live Lining mode is ON, line feeding will not automatically
start.
2. Press the MODE BUTTON three times to show 0.0 (depth
counter) to complete.
The will blinks.
- Speed of the line going out is adjusted with 32 speed levels
ranging between 0 and Hi. It is adjusted in the line feeding
mode.
1. Press the MODE BUTTON to show the line feeding speed
adjustment display. Default setting is zero (OFF).
Set the speed level with the power lever.
(the figure corresponds
to the case of setting to 5)
1
2
(adjustment of
line furnishing)
Functional setting operation
(5. Line feeding function)
Attention
1. During line feeding operation, you cannot set useful functions by pressing the
MODE BUTTON .
2.While letting out line with the motor, the reel remains in Power mode even if the SHIFT
BUTTON is depressed.