Cisco 4490 - Manual (Page 62)

Chapter 3 Installing the Cisco Global Site Selector 4490
Checking the Front Panel LEDs
3-16
Cisco Global Site Selector 4490 Hardware Installation Guide
78-15755-01
If you are booting the GSS 4490 for the first time and the system boots without a
startup-configuration file, a setup script automatically runs to quickly guide you
through the process of initially configuring the GSS. Refer to the Global Site
Selector Configuration Guide, Chapter 2, Setting Up Your GSS and GSSM, for
details.
Checking the Front Panel LEDs
When the Global Site Selector 4490 is up and running, observe the front panel
LEDs.
Figure 3-10 shows the location of front panel LEDs, and Table 3-1
describes their function.
Figure 3-10 Front Panel LEDs
1 CD-ROM drive activity 2 System error
3 Hard disk drive activity 4 Power
Table 3-1 Front Panel LEDs
LED Color State Description
CD-ROM drive
activity Green On Indicates that the CD-ROM drive is in use.
System error Amber On Indicates that a system error has occurred. An LED on
the diagnostic LED panel will also be on to further
isolate the error.
Hard disk drive
activity Green Flashing Indicates that the associated hard disk drive is in use.
83109
1 3 2 4