Cisco 4490 User Manual
Page 66
Chapter 4 Troubleshooting the System Hardware
Checking the Basics
4-2
Cisco Global Site Selector 4490 Hardware Installation Guide
78-15755-02
2.
Visually inspect the chassis. Is the system wet or damaged?
–
Yes. Liquid spills, splashes, and excessive humidity can cause damage to
the system. If a GSS 4490 gets wet, contact your service representative
for instructions. Refer to the
If the chassis was dropped or damaged while being moved, you should
check the system to see if it functions properly. If an external device
attached to the system is dropped or damaged, contact your service
representative for instructions. Refer to the
.
–
No. Go to step 3.
3.
Perform the steps in the
section.
Is the problem resolved?
–
Yes. The power to the system was faulty, or the connections to the system
were loose. You have fixed the problem.
–
No. Go to step 4.
4.
Did the system complete the boot routine?
–
Yes. The system configuration information was correct.
–