Leica Geosystems Leica DISTO Classic5 - Manual (Page 3)

3 How to Use the Instrument
DISTO classic
5
1.2.0 en
de
en
fr
it
es
pt
nl
da
sv
no
fi
jp
zh
ko
pl
hr
hu
ru
cz
el
How to Use the Instrument
Inserting / replacing the batteries
1 Depress the locking clip and slide end piece to the
right.
D5-Z3
2 Remove battery cover. Replace batteries.
Appears on the display if battery voltage is too
low.
For type of battery, refer to Technical Data.
)
Fit batteries the right way round.
)
Use only Alkaline batteries.
3 Push in end piece and listen for locking click sound.
DISTO Switching on/off
Briefly press.
The illumination, Battery and Beep symbols are displayed
until the first key press.
The instrument can be switched off from any menu point.
)
The instrument switches off automatically after
90 seconds if no key is pressed.
Clear key
The clear key resets the instrument to Normal
Mode, i. e. it is set to zero (=Clear).
The clear key may be pressed before or after a
measurement/ calculation.
In Menu Mode it resets to Normal Mode.
During a function (area, volume or Pythagoras) the single
measurements can be deleted step by step and
remeasured.
Used to exit menu settings without saving changes.
Illumination
Briefly press.
Illumination is switched on/off with a key press.
)
Illumination switches off after 30 seconds if no
key is pressed.