Leica Geosystems Leica DISTO Classic5 - Manual (Page 7)

7 Functions
DISTO classic
5
1.2.0 en
de
en
fr
it
es
pt
nl
da
sv
no
fi
jp
zh
ko
pl
hr
hu
ru
cz
el
)
After making/changing settings, it is imperative
that a test measurement is performed.
Resetting
Call up menu point.
starts blinking on the display.
With key [+ / -] select components to be reset. To choose
from:
Stack/ Mermory
Stack and Constant
If additional symbols, e.g. measuring frequency and units
are shown in the display, the following values are reset:
–
Offset (=0), Beep (On) and Units (meter)
Selected components are reset; back to
Measuring Mode.
Functions
Save values (constants)
Measure/ calculate desired value (e.g. height of room,
area, volume).
Press longer.
starts to blink on the display.
With key [+ / -] adjust value as desired (e.g. from 2.297m
to 2.300m).
For larger steps press and hold additionally.
Press to adjust unit (²/³).
)
The adjustment is for m, m² and m³ rsp. ft, ft² and
ft³ only.
Confirm.
and a number (=memory location) starts to blink.
With key [+ / -] select memory location (1-10).
Save value.
Recalling the constant
Press briefly.
and the contents of the first constant memory
location are displayed (e.g. 2.300m).
With key [+ / -] select desired mermory (1 to 10).
Confirm; value is ready to be used for (e.g.
calculating an area) or
Recall last measured value (Stack)
Briefly press twice
and the last value in the display is shown.
With key [+ / -] select desired value (max. 15!).
Confirm; value is ready to be used for (e.g.
calculating an area).