Leica Geosystems PlusDraw - Manual (Page 17)

14
If the area has been completed and closed, the line may be edited by tapping the specific line
with a stylus. The line will be highlighted in red (
Image 24 ). This indicates that the line length
may be edited.
Next, to properly edit the selected line, re-measure the correct distance using the DISTO. Input
the appropriate direction* and press ENTER on the DISTO.
Editing with the PlusDraw KeyPad
Alternatively, the selected line (
Image 24 ) may be edited using the PlusDraw KeyPad.
After selecting a line, access the KeyPad by tapping the keyboard selection icon (
Image 25 ).
Select PlusDraw KeyPad from the available choices. The KeyPad will appear and the sketch will
automatically adjust to the largest viewable size in the drawing area (
Image 26 ).
Image 23
Tap a line to select it.
Tap here to
access the
menu.
Image 24
Help Status bar displays
keyboard measurement
inputs as they are
entered.
Use the Backspace
button ( Image 27 ) to
correct a mis-type.