Leica Geosystems PlusDraw - Manual (Page 18)

15
Tap the desired length using the number pad, and input the appropriate direction* using the
directional arrow keys. Tap the Enter button.
*Note: When editing a line lengt h, the original direction should be used.
Deleting Lines
Open Area
While in the process of capturing measurements (the area is still open), press DELETE on the 2 nd
Function Layer of the DISTO device. The last line will be deleted. Once the appropriate line has
been deleted, re-measure the correct length and continue drawing the area until it is closed.
Additionally, pressing DELETE successively will delete every line back to the point of beginning.
Note: Although not as efficient, you can accomplish the same task by tapping the Del button on
the PlusDraw Keypad.
Closed Area
Deleting the lines of a closed area is not recommended because an area can not be reopened in
this version of PlusDraw. However, you may delete any line by first selecting the line (
Image 24 ),
and then by pressing DELETE on the DISTO or by pressing Del on the PlusDraw KeyPad ( Image
27 ). The area will adjust to a newly formed shape. For example, deleting a single line of a
rectangle will result in a triangle. See example below:
Image 25 Image 26
Enter Button
Directional Arrow Keys
Number Pad (used to enter
line lengths)
Image 24 Image 27
Backspace Button
Delete Button