Leica Geosystems PlusDraw - Manual (Page 5)

2
Note: Older devices may require updated drivers (e.g. cummunication drivers) to function
properly with the DISTO plus. Visit the PPC manufacturer's web site for information and driver
updates.
Required Hardware
n Pocket PC (PPC) with the ability to use Bluetooth ® technology.
Preferred Hardware
n PPC with built-in Bluetooth technology.
Required Software
n Microsoft ® ActiveSync ® .
n Microsoft ® .NET Compact Framework.
n Operating system: Microsoft ® Pocket PC 2000, 2002, or Windows Mobile 2003.
Preferred Software
n Operating system: Windows Mobile 2003.
Installation
Installing PlusDraw
n Synchronize the PPC with the desktop PC using Microsoft ActiveSync.
n Insert the PlusDraw CD and follow the onscreen instructions on the desktop PC and the PPC.
Establishing the Bluetooth Connection
PlusDraw will automatically attempt to determine the proper connection settings to allow the
hardware (PPC) to properly communicate with the DISTO device using the Bluetooth technology.
If PlusDraw is unable to establish the connection automatically or through any method(s)
described in this section, refer to the section titled Manual Setup.
Each time PlusDraw is used in conjunction with the DISTO, a connection between the PPC and
the DISTO will need to be established.