4 why are military receivers more accurate, Anti-spoofing (a-s), Selective availability (s/a) – Leica Geosystems GPS Basics User Manual

Page 18: How gps works 4

Advertising
background image

18

GPS Basics -1.0.0en

How GPS works

4

5. Selective Availability (S/A)

Selective Availability is a process

applied by the U.S. Department of

Defense to the GPS signal. This is

intended to deny civilian and hostile

foreign powers the full accuracy of GPS

by subjecting the satellite clocks to a

process known as ‘dithering’ which

alters their time slightly. Additionally, the

ephemeris (or path that the satellite will

follow) is broadcast as being slightly

different from what it is in reality. The end

result is a degradation in position

accuracy.
It is worth noting that S/A affects civilian

users using a single GPS receiver to

obtain an autonomous position. Users

of differential systems are not signifi-

cantly affected by S/A.
Currently, it is planned that S/A will be

switched off by 2006 at the latest.

6. Anti-Spoofing (A-S)

Anti-Spoofing is similar to S/A in that it’s

intention is to deny civilian and hostile

powers access to the P-code part of the

GPS signal and hence force use of the

C/A code which has S/A applied to it.
Anti-Spoofing encrypts the P-code into a

signal called the Y-code. Only users with

military GPS receivers (the US and it’s

allies) can de-crypt the Y-code.

3.1.4 Why are military receivers more

accurate ?

Military receivers are more accurate

because they do not use the C/A code to

calculate the time taken for the signal to

reach the receiver. They use the P-code.
The P-code is modulated onto the carrier

wave at 10.23 Hz. The C/A code is

modulated onto the carrier wave at 1.023

Hz. Ranges can be calculated far more

accurately using the P-code as this code

is occurring 10 times as often as the C/A

code per second.
The P-code is often subjected to Anti

Spoofing (A/S) as described in the last

section. This means that only the

military, equipped with special GPS

receivers can read this encryted P-code

(also known as the Y-code).
For these reasons, users of military GPS

receivers usually get a position with an

accuracy of around 5m whereas, civilian

users of comparable GPS receivers will

only get between about 15-100m

position accuracy.

A military handheld GPS receiver

(courtesy Rockwell)

Advertising