P-code, Phase observable, Point positioning – Leica Geosystems GPS Basics User Manual

Page 55: Post processing, Precise positioning service (pps), Propagation delay, Pseudolite, Pseudorandom noise (prn) code, Pseudorange, Range

Advertising
background image

55

GPS Basics -1.0.0en

Glossary

P-code
The Precise GPS code - a very long

(about 10

14

bit) sequence of pseudoran-

dom binary biphase modulations on the

GPS carrier at a chipping rate of 10.23

MHz which does not repeat itself for

about 267 days. Each one-week

segment of the P-code is unique to one

GPS satellite, and is reset each week.

Access to the P-code will be restricted by

the U.S. Government to authorized users

only.

PDOP
Position dilution of precision.
see Dilution of Precision

Phase observable
See Reconstructed Carrier Phase

Point Positioning
The independent reduction of observa-

tions made by a particular receiver using

the pseudorange information broadcast

from the satellites.

Post processing
The process of computing positions in

non-real-time, using data previously

collected by GPS receivers.

Precise positioning service (PPS)
The highest level of point positioning

accuracy provided by GPS. It is based

on the dual-frequency P - code.

Propagation delay
See Atmospheric propagation delay,

and Ionospheric delay

Pseudolite
The ground-based differential GPS

station which transmits a signal with a

structure similar to that of an actual GPS

satellite.

Pseudorandom noise (PRN) code
Any group of binary sequences that

appear to be randomly distributed like

noise, but which can be exactly distrib-

uted. The most important property of

PRN codes is that the sequence has a

minimum autocorrelation value, except

at zero lag.

Pseudorange
A measure of the apparent signal

propagation time from the satellite to the

receiver antenna, scaled into distance by

the speed of light. The apparent propa-

gation time is the difference between the

time of signal reception (measured in

the receiver time frame) and the time of

emission (measured in the satellite time

frame). Pseudorange differs from the

actual range by the influence of satellite

and user clock.

Range
Term used in Navigation for the length of

the trajectory between two points. The

trajectory is normally the great circle or

the rhumb line.

Advertising