Panasonic SC-CH64M - Manual (Page 13)

Sequential play
The changer plays all the tracks on all the discs in order and stops
automatically when the last track on the last disc finishes playing.
Press CD.
The power will come on automatically,
even if the stereo is on standby.
While the changer checks which slots
have CDs and which don’t, you will hear
the internal mechanism working. In the
meantime, “SEARCH" will flash on the
display.
2 Press MODE to select
“BLOCK”.
Each time you press the button, “BLOCK"
and “GROUP” will appear alternately.
DISC SKIP/
GROUP NAME
Press DISC SKIP/GROUP
NAME (
V
or
a )
until you reach
the desired disc.
a : Skips forward to next disc,
v: Skips backwards to the preceding
disc.
Press ►.
Play will begin.
Track number
Disc number of
Indicates another
disc(s) will follow.
Disc number of next
disc Elapsed playing time
(Current disc number)
The changer will play all CDs up through the one before the CD you
started with, and it will stop automatically after playing the last track
on it.
VOLUME Turn VOLUME to adjust the
volume as you like.
To temporarily stop play:
To stop play:
Press 11.
Press ► to resume play.
Press ■.
The display will show the total number of
tracks and the total playing time of the
current disc.
Total number of
tracks
Current disc
The total playing time displayed includes the silent sections between
tracks. For this reason, it may be a few seconds longer than the
playing time indicated on the disc.
When you open the rack panel, the total number of tracks and the
total playing time go out.
Press ► to re-start play. mm
Outside light or noise may sometimes cause the changer to detect a
disc when there isn’t one. However, the changer always correctly
detects the disc when in the play mode no matter what.
When “ ^ ” appears on the display;
It indicates there are 16 or more tracks on the disc at the playing
position.
When “NO DISC” appears on the display:
It indicates there is no disc set in the slot.
For your reference
If you leave the front panel open while a disc is in play, wtien the disc
is over, the changer will stop.
Convenient way to use GROUP FILE buttons (A-F):
The changer automatically divides the CD rack up into 6 blocks as
shown below.
DISC SLOT 1-10 11-20 21 -30 31-40 41-50 51-60
BLOCK A B c D E F
One way to organize yourself would be to arrange the blocks by band
or solo artist. Within each block, you could then set the discs in
chronological order from the earliest you have until the band’s
(artist's) most recent. In sequential play, discs will be played in the
set order.
13