Panasonic SC-CH64M - Manual (Page 35)

timer
by remote control only
The stereo has a sleep timer so that you can fall asleep with the
music on and have the system stop by itself. When the set time
elapses, the stereo goes into the power standby mode. You have up
to 2 hours time available for listening and you can set the timer in
30 minute increments.
SLEEP o
escbciis
6 OS'S
►11 jL 53? waw*
oo O q
■(fbc^n
The following exampie in the figure shows how to set the system to
standby mode after 30 minutes.
Record timer and sleep timer:
To go to sleep listening to a compact disc, and then to make a timer
recording from a radio broadcast,
® Program the record timer.
Follow steps 1-6 on pages 33-34,
(5) Start CD playback.
(3) Set the sleep timer.
rrm
Be sure to set the sleep timer to off before the timer recording
begins.
Timer priority:
The sleep timer always has priority. Be sure not to overlap timer
settings.
For your reference
The play timer cannot be used in combination with the record timer.
Using an external
unit
SLEEP
While enioying the desired source:
Press SLEEP to select the de­
sired time.
0:30-» 1:00-»T.30-»2;00~»OFF------ ,
C
(The display changes each time the but­
ton is pressed.) Time setting
Check “SLEEP” is displayed.
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press SLEEP to select “OFF”.
To confirm the remaining time:
(only while power is ON)
Press SLEEP.
To change the time remaining during operation:
Press SLEEP to show the remaining time then press SLEEP to select
the desired time.
igBra
The sleep timer turns OFF automatically the moment you attempt to
edit-record a CD,
To use two timers together
The sleep timer can be used in conjunction with the play timer or
record timer.
Play timer and sleep timer:
To go to sleep listening to an FM broadcast, and wake up the next
morning listening to a compact disc,
® Program a CD for play timer.
Follow steps 1 -6 on pages 31 -32.
(2 ) Tune in the desired band and station, and adjust the volume.
See page 11.
@ Set the sleep timer.
The volume of the play timer does not change if the volume of the
sleep timer is changed.
Listening to an external source
(See page 7 for external unit connection)
1. Press AUX,
The power will come on automatically, even if the stereo is on
standby.
2. Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)
Recording from an external source
1. Follow steps 1 -4 on page 27.
2. Press AUX.
3. Press REG START/STOP (recording starts).
4. Start playback from the external source, (For details, refer to the
owner’s manual of the equipment.)
To stop recording;
1. Press REC START/STOP.
2. Stop the source.
Listening with headphones
rWBI
Connect the headphones to the headphones jack.
•Before connecting, reduce the volume.
•Avoid listening for prolonged periods of time to prevent hearing
damage. 35