Logo print position, Overseas transmission mode – Panasonic KX-F1000NZ User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Logo print position
Logo, telephone number, date, time and page number will be printed on the transmitted document from your
unit in the following manner.
OUT:
Outside of the transmitted document’s paper size (pre-selected setting)
IN;
Inside of the transmitted document’s paper size
OFF:
Not printed
To change the setting, proceed as follows.
Press [MENU]. _________________________ ^
IMENUI
2 Press
(D,
then
(D(T).
0 Press [START/SETl.
SYSTEM SET UP
LOGO POSITION
MODE=OUT [ A T ]
4
Press or| ▼
I
to select the desired
setting.
0 Press iSTART/SETl.
0 Press iMENUl.
Overseas transmission mode
Dial keypad
1 START/SETl
You may experience difficulty in transmitting documents overseas.
This feature will make sending documents easier as the transmission speed is slowed down.
SYSTEM SET UP
OVERSEAS MODE
Press IMENUl.
2 Press (D, then (D(3).
2 Press I START/SETl.
^ Press orp^ to select “ON”.
IMENUl
MODE=OFF
[ A T ]
MODE=ON
[ A T ]
•If this feature is not required, seiect
“OFF”.
Press I START/SETl.
0 Press IMENUl.
•Then start transmission procedure (see
iai, pages 15 and 16).
Dial keypad 1 START/SETl
Note:
•After the transmission has completed, this feature
will be turned off automatically.
•When using this feature, transmission time will
increase.
35