Connections – Panasonic KX-F1000NZ User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Power socket
.J
' ....................... ^ '
Power cord
Connect to LINE.
Handset
Handset cord
Dialing mode switch:
Set to TONE.
—If you cannot dial, set
to PULSE.
DIALING MODE
TONE PULSE
Telephone line cord
^ Single telephone line
Power outlet
{220-240V)
Note:
•When you operate this product, the power outlet should be near the product and easily accessible.
•The unit will not function during a power failure.
•You can connect an extension phone or a telephone answering machine to the unit after peeling off the tape
on the external telephone jack (EXT.). See page 21.
•When you connect another telephone on the same line and if the decadic (pulse) signalling option is used, bell
tinkle may occur during dialing. If this occurs, the matter should be discussed with the telephone supplier and
should NOT be referred to Telecom Faults Service.
•Not all standard telephones will respond to incoming ringing when connected to the same line or the external
telephone jack (EXT.).
Helpful hint:
If assistance is needed, press IHELPI. The unit will print a quick reference.