Panasonic PanaSync S110 - Manual (Page 12)

Pin Assignment
Follow the instructions below to connect the S110 to a computer.
A. Signal connector:
1 5 -pin mini D-Sub (PS/2 or PC/AT compatible model)
Connect the signal cable to the 15-pin mini D-Sub connector on the display unit.
B. Signal connector: 15-pin D-Sub (Apple computer)
Convert a MAC 15-pin D-Sub connector to a 15-pin mini D-Sub connector using a Panasonic MAC adapter,
and connect it to the 15-pin mini D-Sub connector on the display unit.
<REAR PANEL >
Pin assignments of 15-pin mini D-Sub connector
Pin number Signal name
1 Red video signal
2 Green video signal
3 Blue video signal
4 Ground
5 Ground*
6 Ground for Red video signal
7 Ground for Green video signal
8 Ground for Blue video signal
9 Unused
10 Ground
11 Ground
12 SDA* (Bi-directional Data)
13 Horizontal sync, signal
14 Vertical sync, signal
15 SCL* (Data Clock)
★ : “VESA”s Display Data Channel (DDC) Standard.
C.Signal connector:
bnc connector
Sync on green system
Connect the signal cable to RED, GREEN (sync on
green) and BLUE BNC connectors.
Composite sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC (H/V oomposite)BNC connectors.
Separate sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC and V-SYNC BNC connectors.
Note : If your computer’s video output is over 110MHz, it Is recommended that it be
used with the BNC connectors.
- 6
-