Panasonic PanaSync S110 - Manual (Page 18)

< Onscreen Display> < Function and Operation>
^ Recall
R e c a l l
O K ?
[ H : Y e s N o : S
To return to the initial settings (the settings at the
time of factory shipment).
1) When the lU key (Yes) is pressed, the settings
are recalled and the menu screen returns.
(Recall = return to settings at time of factory
shipment.)
2) When the \2} key (No) is pressed, the menu
screen returns without the settings being
recalled (the settings return to what they were
immediately before the recall).
• If no operations are performed for about 30
seconds, the screen goes off without recall.
¿1© Video Level
V i d e o L e v e l
0 . 7 V
0.7/1 V :(S]
The video input signal level can be matched to
the computer being used. Either 0.7V or 1 .OV
can be selected with the
H\ key.
Note : 0.7V is typical.
(If wrong level is selected image may be too dim
or too bright.)
^ H. Moire reduction
H. M o i r e
Off
O n / O f f : [ 2 ]
H. Moire adjustment
H . M o i r e
5 0
O n / O f f :
Horizontal moire reduction turned On or Off.
Use the H] key to select On or Off.
When On is selected with [H key, the adjustment
screen appears.
Adjust the horizontal moire to its optimum
condition using the 9 and B keys.
Press Q] to return to main menu and save
adjustment.
V. Moire reduction
V. M o i r e
O f f
O n / O f f : {2\
V. Moire adjustment
V . M o i r é
5 0
O n / O f f :
Vertical moire reduction turned On or Off.
Use the [H key to select On or Off.
When On is selected with [H key, the adjustment
screen appears.
Adjust the vertical moire to its optimum
condition using the 9 and B keys.
Press Q] to return to main menu and save
adjustment.
-12 -