Press 0 (yes key), Press © or 0 to select “b” or “a, Press 0 (save key) – Panasonic KX-TG2650N User Manual
Page 14: Selecting the line mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise the Call Waiting Caller ID Feature may not be used (p. 50).
Your phone comes from the factory set to “A”.
Use the handset near the base unit.
Make sure the unit is in the standby mode initially.
6
7
Press
[FUNCTION/CHl.
Press (▼] or ® repeatedly until the arrow
points to
“Program”.
Press 0
(Yes
key).
Press ® or @ repeatedly until the arrow
points to
“Set line mode”.
Press 0
(Yes
key).
Press © or 0 to select
“
b
”
or
“
a
”.
Press 0
(Save
key).
•A beep sounds.
•To return to the standby mode, press [OFF],
► Save directory
Ringer volume
TA
► =Yes
► Program
TA
► =Yes
► Save DIRECT#
Set flash time
TA
► =Yes
► Set line mode
Talk switching
TA
► =Yes
Line mode
TA
:A
► =Save|
Line mode
: B
TA
► =Save
»You can exit the programming mode any time by pressing [OFF|.
•If the handset has lost communication with the base unit, 3 beeps sound and
“No
link to base. Place on cradle and try again
.” is displayed.
¡4