Panasonic KX-TG2650N - Manual (Page 61)

You cannot program items,
such as the dialing mode.
Problem
»Programming is not possible while the
unit is in the talk or speakerphone mode
or when viewing the Caller List/directory
list.
»Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•®. ®. 0 or ® may have been
pressed when you picked up the
handset. Press [OFFI and try again.
Remedy
•If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory. »You cannot store an item in the directory
while the unit is in the talk,
speakerphone or intercom mode.
•Do not pause for over 60 seconds while
storing.
While programming or
searching, the unit starts to
ring and stops the program/
search.
•To answer the call, press
S), HD
or
(DIGITAL SP-PHONEl. Start again from
the beginning after hanging up.
The unit does not display the
caller’s name and/or phone
number.
•You need to subscribe to a Caller ID
service from a telephone company.
»Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•Telephone line noise may be affecting
the Caller ID information.
61