Press ifunction/chl, Press 0 (yes key), Enter a phone number, up to 22 digits – Panasonic KX-TG2650N User Manual
Page 34: Press 0 (next key), One-touch dialer, Storing a phone number in the direct button, Save direct, Next, Save, Ta ► =yes ► save direct# set flash time ta ► =yes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One-Touch Dialer
You can store a phone number in the I DIRECT! button of the handset. The
stored number is dialed with a one-touch operation.
storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode Initially.
Press iFUNCTION/CHl.
1
Press ® Of ® repeatedly until the arrow
points to “Program”.
Press 0
(Yes
key).
While the arrow points to
“save
DIRECT#”,
press 0
(Yes
key).
Enter a phone number, up to 22 digits.
•Each time you press
ICLEAR/lNfER^OMl
the
digit to the left of the cursor is erased. To erase
all digits, press and hold
ICLEARTiNTERCOMl.
•To move the cursor, press ® or
0.
Press 0
(Next
key).
•If you want to edit the entered number, press
0 (Edit
key) and return to step 5.
Press 0
(Save
key).
•A beep sounds.
►Program
TA
► =Yes
► Save DIRECT#
Set flash time
TA
► =Yes
0
T=Next
i
1234567890123456
789 0T2’
T=Next
1234567890123456
789012
A=Edit ►=Save
•To return to the standby mode, press
[OFF],
1234567890123456
789012
Save DIRECT#
•You can exit the programming mode any time by pressing
(OFF).
•If a pause is required for dialing,
iREDIAUPAUSEl
can be stored in a phone
number in step 5. This counts as one digit (p. 49).
34