Panasonic VCR PV-M1326 - Manual (Page 13)

Playback a Tape
Check list before you begin
□ All connections are made,
(See page 5.)
□ Your Combination VCR is piugged in.
Insert a cassette.
• Combination VCR power comes on
automatically.
Caution:
Please inspect your cassette tape for
any loose or peeling labels as it may
become jammed in your unit.
ci:> Push PLAY to start playback.
• Playback begins if cassette has no
record tab.
(Unit or Remote Control)
REW/
e
0) or
FF/
S
(Unit or Remote Control)
Push REW or FF to
quickly locate a scene.
• SLP mode tapes 27 times the normal
speed.
• Some noise bars will appear during search.
Push STOP to stop playback.
ci:>
STOP
(Unit or Remote Control)
sTop/EJECT STOP/EJECT to eject the cassette.
I • This button only on Combination VCR.
Special Effects During Playback
These features work best in SLP mode. The sound will be muted.
(After the Combination VCR is in the Still or Slow mode for 3 minutes, it will go
into the stop mode automatically to protect the tape and video head.)
Slow Motion Playback
Push SLOW to start and then, push SLOW UP/DOWN to vary the tape
speed. To release the Slow mode, push PLAY or SLOW.
Still (Freeze) Frame Picture
Push PAUSE to freeze and release the picture.
Frame by Frame Advance
While in Still mode, push repeatedly or hold down the SLOW button to
advance the still picture one frame at a time. Push PAUSE or PLAY
to release.
Feature for a Quality picture
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Push the CH (TRACKING)A/T buttons until the picture clears up.
To return to Auto Tracking, eject and re-insert the tape.
13