Panasonic VCR PV-M1326 - Manual (Page 15)

Record On a Tape
Check list before you begin.
D All connections are made (see page 5).
I]
Your Combination VCR is plugged in.
Insert a cassette with record tab
The Combination VCR power
comes on automatically.
0
SPEED
Push CH UP or DOWN
or NUMBERED keys to
select a channel.
• Or, push the CH Up/Down
button on Combination VCR.
• To record from an outside
source, push the CH Up/Down
to select LINE (see below).
Push SPEED until the
desired speed appears
on-screen.
• SP = standard Play, LP = Long
Play, SLP = Super Long Play.
Selecting the Input Mode
You can select the Input Mode in one of
two ways.
■ Push the CH Up/Down button.
The display will change in the order
below.
r~(c>
' — 1 ir
1 — 2 — 3--------
(CATV)
LINE-*-------- 125 or 69
D
Push the MENU button to display
the menu.
Then, use the SELECT Up/Down
and SET buttons to select “TV” and
then “INPUT SELECT.”
Finally choose ‘TUNER” or “LINE.”
REC/TIME
Push RECATIME
to start recording.
• Or, push the PLAY and REC/TIME
buttons on Combination VCR.
One Touch Timer Recording (OTR)
The Combination VCR stops recording at
a preset time.
Continue to push the REC/TIME button to
set the recording length.
Each Push will change the time as shown.
REC 02
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
After 2 seconds
C Normal Rec-
4:00-«—3:00-*-
>•0:30-► 1:00
- 2 : 00 ^ 1:30-*-^
PROGRAM TIMER indicator lights on
the front panel.
Push the PAUSE button to pause a
One Touch Recording in progress.
REC WNET
0:00:30
SLP
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
cr>
Push STOP to
stop recording.
• Or, push the STOP button
on Combination VCR.
While it is possible to change the tape speed when you are
recording, there will be some destortion on the tape where the
change occured.
Push PAUSE to pause a recording in progress. (After the
Combination VCR has been in Rec Pause mode for 5 minutes,
it will stop automatically to protect the tape and video head.)
The recording time remaining will appear when the DISPLAY
button is pushed during OTR mode.
15